# I/O Devices

**URL:** https://mworks.discourse.group/c/kb/io-devices/12.md

[Latest](https://mworks.discourse.group/latest.md) · [Categories](https://mworks.discourse.group/categories.md) · [Tags](https://mworks.discourse.group/tags.md)

---

## [About the I/O Devices category](https://mworks.discourse.group/t/about-the-i-o-devices-category/27)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [July 18, 2022, 3:21pm UTC](https://mworks.discourse.group/t/about-the-i-o-devices-category/27 "2022-07-18T15:21:41Z")

</div>

Help with input/output devices in MWorks.

---

## [Setting up an Arduino or compatible microcontroller as a Firmata device](https://mworks.discourse.group/t/setting-up-an-arduino-or-compatible-microcontroller-as-a-firmata-device/57)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [August 18, 2020, 7:24pm UTC](https://mworks.discourse.group/t/setting-up-an-arduino-or-compatible-microcontroller-as-a-firmata-device/57 "2020-08-18T19:24:11Z")

</div>

In order to be used with MWorks’ Firmata interface, an Arduino board or Arduino-compatible device must first be configured to support the Firmata protocol. To do this, follow these steps: Install and launch the Ardui…

---

## [Setting up an Adafruit Feather M0 Bluefruit LE as a Firmata device](https://mworks.discourse.group/t/setting-up-an-adafruit-feather-m0-bluefruit-le-as-a-firmata-device/59)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [August 18, 2020, 7:29pm UTC](https://mworks.discourse.group/t/setting-up-an-adafruit-feather-m0-bluefruit-le-as-a-firmata-device/59 "2020-08-18T19:29:11Z")

</div>

The Adafruit Feather M0 Bluefruit LE is a good choice for use with MWorks’ Firmata interface, particularly if you need to connect via Bluetooth Low Energy (BLE). The following steps detail how to prepare your board for …

---

## [Setup for using the EyeLink 1000](https://mworks.discourse.group/t/setup-for-using-the-eyelink-1000/39)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [June 1, 2021, 4:15pm UTC](https://mworks.discourse.group/t/setup-for-using-the-eyelink-1000/39 "2021-06-01T16:15:57Z")

</div>

Before you can use an EyeLink 1000/1000 Plus eye tracker with MWorks, you must install the required interface software. First, if you have not already done so, register for access to the SR Research Support Site. Once …

---

## [Setup for using NI-DAQ devices](https://mworks.discourse.group/t/setup-for-using-ni-daq-devices/40)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [April 30, 2018, 3:18pm UTC](https://mworks.discourse.group/t/setup-for-using-ni-daq-devices/40 "2018-04-30T15:18:32Z")

</div>

Note: As of MWorks 0.12, NI-DAQ devices are no longer supported. The following information applies only to MWorks 0.11 and earlier. MWorks can interface with National Instruments data acquisition (NI-DAQ) devices via th…

---

## [Setup for using the ITC-18](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52)

<div class="topic-metadata">

**Author:** [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Replies:** 0\
**Last updated:** [March 30, 2015, 1:32pm UTC](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52 "2015-03-30T13:32:35Z")

</div>

Note: As of MWorks 0.12, the ITC-18 is no longer supported. The following information applies only to MWorks 0.11 and earlier. Before you can use an ITC-18 in your experiments, you must install the ITC-18 drivers. To d…