# Installing MWorks

**URL:** <https://mworks.discourse.group/t/installing-mworks/36>\
**Category:** Installation\
**Created:** [April 30, 2018, 2:53pm UTC](https://mworks.discourse.group/t/installing-mworks/36 "2018-04-30T14:53:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cstawarz](https://yyz1.discourse-cdn.com/flex031/user_avatar/mworks.discourse.group/cstawarz/32/3_2.png) [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Post date:** [April 30, 2018, 2:53pm UTC](https://mworks.discourse.group/t/installing-mworks/36/1 "2018-04-30T14:53:26Z")

</div>

## Basic Installation

To learn the basics of installing MWorks, see [Installation](https://mworks.github.io/documentation/latest/guide/installation.html) in the user manual.

## Additional Post-installation Steps

Depending on your needs, there are some additional steps you may need to take after installing MWorks:

- [Setup for using MATLAB](https://mworks.discourse.group/t/setup-for-using-matlab/37)
- [Setup for using the EyeLink 1000](https://mworks.discourse.group/t/setup-for-using-the-eyelink-1000/39)
- [Setup for using the ITC-18](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52)
- [Setup for using NI-DAQ devices](https://mworks.discourse.group/t/setup-for-using-ni-daq-devices/40)

## Configuration

If this is your first time installing MWorks, or you’re upgrading from MonkeyWorks, you’ll need to [configure your installation](https://mworks.github.io/documentation/latest/guide/installation.html#configuration) before running experiments.

---

<div class="post-metadata">

**Author:** ![cstawarz](https://yyz1.discourse-cdn.com/flex031/user_avatar/mworks.discourse.group/cstawarz/32/3_2.png) [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Post date:** [July 20, 2022, 4:03pm UTC](https://mworks.discourse.group/t/installing-mworks/36/2 "2022-07-20T16:03:41Z")

</div>