# Setup for using the ITC-18

**URL:** <https://mworks.discourse.group/t/setup-for-using-the-itc-18/52>\
**Category:** I/O Devices\
**Created:** [March 30, 2015, 1:32pm UTC](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52 "2015-03-30T13:32:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cstawarz](https://yyz1.discourse-cdn.com/flex031/user_avatar/mworks.discourse.group/cstawarz/32/3_2.png) [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Post date:** [March 30, 2015, 1:32pm UTC](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52/1 "2015-03-30T13:32:35Z")

</div>

_Note: As of [MWorks 0.12](https://mworks.github.io/news/2023/04/12/0.12-released/), the ITC-18 is no longer supported. The following information applies only to [MWorks 0.11](https://mworks.github.io/news/2022/02/16/0.11-released/) and earlier._

Before you can use an [ITC-18](http://heka.com/products/products_main.html#acq_itc18) in your experiments, you must install the ITC-18 drivers. To do so, download the [driver installer package](http://heka.com/downloads/downloads_main.html#down_acq) and run the installer application. Be sure to restart your system when finished.

Note that this needs to be done only once. You don’t need to reinstall the drivers if you upgrade MWorks.

---

<div class="post-metadata">

**Author:** ![cstawarz](https://yyz1.discourse-cdn.com/flex031/user_avatar/mworks.discourse.group/cstawarz/32/3_2.png) [@cstawarz](https://mworks.discourse.group/u/cstawarz)\
**Post date:** [July 20, 2022, 4:03pm UTC](https://mworks.discourse.group/t/setup-for-using-the-itc-18/52/2 "2022-07-20T16:03:42Z")

</div>